Comments for BLHeli_32 http://www.blheli32.com All about BLHeli_32 Mon, 23 Oct 2017 17:37:06 +0000 hourly 1 https://wordpress.org/?v=4.7.7 Comment on BLHeliSuite32 rev32.2.0.1 Released by John http://www.blheli32.com/blhelisuite32-rev32-2-0-1-released/#comment-207 Mon, 23 Oct 2017 17:37:06 +0000 http://www.blheli32.com/?p=370#comment-207 For me it’s the same… Am I just too stupid for it?

]]>
Comment on BLHeliSuite32 rev32.2.0.1 Released by Carlos http://www.blheli32.com/blhelisuite32-rev32-2-0-1-released/#comment-206 Fri, 20 Oct 2017 14:27:29 +0000 http://www.blheli32.com/?p=370#comment-206 Have the same issue. Can’t find the 32,3 hex file anywhere

]]>
Comment on AIRBOT ORI32 4IN1 ESC 4X25 by Dave Lendl http://www.blheli32.com/airbot-ori32-4in1-esc-4x25/#comment-204 Mon, 16 Oct 2017 13:31:22 +0000 http://www.blheli32.com/?p=363#comment-204 Can someone make an answer about that ” Also, the BLheli32 suite can’t read the passthrough, even through I have betaflight 3.2 installed on the FC.”

]]>
Comment on BLHeliSuite32 rev32.2.0.1 Released by Bludz http://www.blheli32.com/blhelisuite32-rev32-2-0-1-released/#comment-203 Sat, 07 Oct 2017 08:40:11 +0000 http://www.blheli32.com/?p=370#comment-203 Really looking forward to test telemtry on my LittleBee Summer ESC’s.

The latest suite doesn’t have any hex files in the hex file folder. Also says 32200 when I guess it should now be 32201?

]]>
Comment on AIRBOT ORI32 4IN1 ESC 4X25 by Dave Lendl http://www.blheli32.com/airbot-ori32-4in1-esc-4x25/#comment-202 Sun, 01 Oct 2017 17:36:08 +0000 http://www.blheli32.com/?p=363#comment-202 For the life of me, I cannot get this ESC to work anymore. When building my quad, it worked on the first few power ups, but after attaching the Nano v2, it ceased responding after a few times. The power is still being sent through the ESC to the FC and betaflight is reading it fine, but the motors won’t respond to anything, and they don’t make the startup sound when the lipo is connected. Also, the BLheli32 suite can’t read the passthrough, even through I have betaflight 3.2 installed on the FC.

On further inspection, other websites state there need to be external capacitors attached. The site I got it from (readytoflyquads) had no mention of this, so I installed it as is. I think that may have fried the ESC after a few uses, though I can see no damage nor smell the signature “magic smoke”. ReadToFlyQuads, PUT A DISCLAIMER ON YOUR WEBSITE THAT THIS NEEDS EXTERNAL CAPACITORS!

]]>
Comment on Spedix GS30 32Bit Dshot1200 ESC-30A by Paulo http://www.blheli32.com/spedix-gs30-32bit-dshot1200-esc-30a/#comment-195 Mon, 14 Aug 2017 00:01:59 +0000 http://www.blheli32.com/?p=287#comment-195 Thank you

]]>
Comment on Spedix GS30 32Bit Dshot1200 ESC-30A by BLHeli32.com http://www.blheli32.com/spedix-gs30-32bit-dshot1200-esc-30a/#comment-194 Fri, 11 Aug 2017 01:50:44 +0000 http://www.blheli32.com/?p=287#comment-194 The Spedix GS30 does not have a current sensor. When you are connected with the Suite, you can see if the ESC has current sensor or not:
– If the “Current Protection” programming is there, then the ESC has a current sensor.

]]>
Comment on Spedix GS30 32Bit Dshot1200 ESC-30A by Paulo http://www.blheli32.com/spedix-gs30-32bit-dshot1200-esc-30a/#comment-193 Wed, 09 Aug 2017 03:16:17 +0000 http://www.blheli32.com/?p=287#comment-193 Does the spedix esc have also a built in current sensor for telemetry?

]]>
Comment on Spedix GS30 32Bit Dshot1200 ESC-30A by Anonymous http://www.blheli32.com/spedix-gs30-32bit-dshot1200-esc-30a/#comment-192 Tue, 08 Aug 2017 03:07:29 +0000 http://www.blheli32.com/?p=287#comment-192 the firmware doesn’t seem to be showing up in the blheli32 suite just says unknown firmware

]]>
Comment on BLHeliSuite32 Rev32.1.0.1 Released by gottxfpv http://www.blheli32.com/blhelisuite32-rev32-1-0-1-released/#comment-190 Thu, 03 Aug 2017 16:19:21 +0000 http://www.blheli32.com/?p=297#comment-190 how does it have to be connected to my esc and to my fc. I actually have my signal wire and power wires connected where it usually go but no telemetry working

]]>