Typhoon32 4in1 ESC 4x35A Released by Airbot

At least five manufacturers have launched their 4 in 1 ESC’s, including FPV Model, Sunrise, Racerstar, Lumenier. See our post 4-IN-1 BLheli_32 ESC’s. And now here comes Airbot,  the manufacturer of Wraith32 series BLHeli_32 ESC’s. They have newly released a new 4 in 1 ESC Typhoon32.

Where to buy: https://store.myairbot.com/esc/typhoon324in1.html



  • 32bit ESC with BLHELI32 firmware
  • Supports 3-6S lipo input
  • 4PWM input
  • Voltage output (VBAT)
  • NO BEC
  • Supports oneshot / Multishot / Dshot PWM
  • Mount holes: 35mm x 35mm
  • Supports damped light
  • External capacitors needed

The Typhoon32 comes with built-in current sensor and ESC telemetry, comes with 30.5×30.5 mm Mounting holes, supports DSHOT 1200, BLHELI32 firmware.  But it does not come with the cables like the Betaflight ESC and Lumenier ESC do for easy soldering. However, Airbot offers two other options for the 3cm and 7cm cables.

A friendly reminder from Airbot: different frames will cause different test results with the current. There is no Guarantee for you to get the same result in your frame due to the current may be higher or lower.